The design of a good power supply must comprehensively consider these factors, because the power supply is as important as the human heart in the whole lamp. When LED is used as a display or other lighting equipment or backlight, it is necessary to drive it with constant current. The main reason is to avoid the drive current exceeding the maximum rating value and affecting its reliability.
Yellow Green LED 7 Segment
0.39-inch 1 Digit Single Display Common Cathode CC
Yellow Green LED 7 Segment
0.8 inch 0.8 2 Digit Dual Display Common Cathode CC
Red Ultra Bright LED 7
Segment Display 0.56 inch Four Digit Common Anode CA
Orange Seven Segment LED Display
1.5inch 1.5" Single Digit Common Anode CA
Green 7 Segment LED Display
0.3 inch 0.3 Four Digit 4 7-seg CC CA
Green 5x7 LED Matrix Display
Dot Diameter 3mm 1.54" 1.25" 1.1" Common Cathode
Yellow Green 5x8 LED Dot
Matrix 5mm Diameter 2.3" 2.4" Display CC Cathode
White 7seg Display Seven Segment
LED 0.36 inch 0.36" 4 Digit Four CA CC
White 7seg Display Seven Segment
LED 0.45 inch 0.45" 3 Digit Three CA CC
Orange 8x8 Display Dot Matrix
1.9mm Diameter 0.8" CA LED CC
LED without high quality radiator, then its life may be far less than the current ordinary energy-saving lamps! Because the light decline to the initial light flux of 70%, has marked the end of the life of LED energy-saving lamps.Power supply, whether through the high temperature and humidity, whether through the high voltage safety rules (UL), whether through the electromagnetic compatibility (EMC/EMI), are also some hard indicators, but also determines the real life of LED energy-saving lamp, barrel effect, power supply may be the short board of LED energy-saving lamp.
CL3022AW LED
CL3022AW 7-Segment
CL3022BW Display
CL3022BW 0.30 inch
