LED Products :: InGaAlP LED absorption substrate

InGaAlP LED absorption substrate (AS) has a lumen efficiency of 101m/w and transparent substrate (TS) is 201m/w, 10-20 times higher than gaasp-gap LED 5161BB luminescence efficiency in the wavelength range of 590-626nm.In the 560-570 wavelength range, it is 2-4 times higher than the gaasp-gap 5161BB LED. The ultra-high brightness InGaN LED provides blue light and green light with a wavelength range of 450-480nm, 500nm and 520nm respectively. Its lumen efficiency is 3-151m/w. The lumen efficiency of ultra-bright 5161BB leds has surpassed that of incandescent lamps with filters. They can replace incandescent lamps with a power of less than 1w, and LED 5161BB arrays can replace incandescent lamps with a power of less than 150w. For many applications, incandescent bulbs use a filter to produce red, orange, green and blue, while ultra-bright leds produce the same color.

http://www.xlitx.com/datasheet/5161BB.pdf

Each LED lamp strip must be equipped with a special plug (plug with transformer); When connecting, be sure to remove the transparent plastic cover plate, and then cover it after connecting the test lamp. Do not connect directly with a cover, it is easy to short circuit. When the LED lamp belt is installed, it is generally placed in the lamp slot and put straight.

8106AB LED 8106AB 7-Segment 8106BB Display 8106BB 0.80 inch

Mini LED is between the small spacing LED and Micro LED. It is the result of the further refinement of small spacing LED. Among them, the small spacing LED refers to the LED backlight or display products with the spacing between adjacent bead points below 2.5 mm. Micro LED, Mini LED and OLED all belong to the active self-luminous display, which has a high utilization rate of light. LCD, on the other hand, is a passive luminescent display, which requires a backlight source to provide light.

CL3911AB LED CL3911AB 0.39 inch CL3911BB 7-Segment CL3911BB Display

Common dimming methods of LED lights, LED era is developing rapidly, the control of lamps is no longer a simple opening and closing, a variety of dimming methods have been used in a variety of shopping malls, hotels, office buildings, to meet the needs of different times, different scenes of the light environment. At present, there are mainly the following intelligent control LED dimming methods, Cutting edge control LED dimming, the principle is to adjust the conduction Angle of each half wave of alternating current to change the sinusoidal waveform, so as to change the effective value of alternating current, in order to achieve the purpose of LED dimming.

LED 8031AS 7-Segment 8031AS 0.80-inch 8031BS Display 8031BS