With the increasingly serious global energy shortage, people pay more and more attention to the development prospect of LED in the lighting market. LED will be a potential light source to replace incandescent lamp, tungsten lamp and fluorescent lamp.
3261AS 0.36 inch
3261AS LED
3261AS Display
3261BS Red
3261BS 7 segment
3261BS LED
LED lamp belt installation guide, indoor installation, LED lamp belt for interior decoration, because do not have to withstand the wind and rain, so the installation is very simple. Take LED light strips produced by Guanghong Electronics for example.
8011AB LED
8011AB 7-Segment
8011BB Display
8011BB 0.80 inch
Micro leds support higher brightness, high dynamic range, and wide color gamut for fast update rates and lower power consumption. And the inorganic gallium nitride material used in micro-LED technology can reduce the requirements for polarization and packaging layer, which can make the display panel thinner. Different from LCD and OLED display technologies, Micro-LED displays are relatively direct and simple in structure. Compared with the small-pitch LED, the important feature of Mini LED lies in the de-packaging, mainly positioning high-end small-pitch LED market, which can achieve higher resolution and display effect.
3191AGG LED
3191AGG 0.39 inch
3191BGG 7-Segment
3191BGG Display
The disadvantage is that the dimming performance of thyristor LED is poor, which usually leads to a reduced dimming range of LED, and causes the minimum required load to exceed the rated power of a single or a small number of LED lights. Because of the properties of the thyristor semi-controlled switch, only the function of opening the current, but not completely turn off the current, even if adjusted to the lowest there is still a weak current, and the characteristics of LED micro-current light, so that there is a large number of thyristor LED dimming after switching off LED still has a weak light phenomenon.
LED
CL8031AH 7-Segment
CL8031AH 0.80-inch
CL8031BH Display
CL8031BH
