The structure is simple, the cost is low, the input is not isolated program, has the security hidden trouble. The conversion efficiency is very low, and constant current control cannot be achieved. Isolated flyback circuit, the flyback circuit is used to generate the dc level through the transformer on the side side, and then feedback the ripple of this level back to the original side through optocoupler, so as to self-excitation stability.
White 7seg Display Seven Segment
LED 0.3 inch 0.3" 2 Digit Dual CA CC
White 7seg Display Seven Segment
LED 0.43 inch 1 Digit Single CA CC
Blue 0.3 inch Single Digit
7-Segment LED Display 7 Segment Common-Cathode CC 0.30" Common Anode CA
Blue 7 Segment Display LED
7-Segment 0.43" 2-Digit Dual Common Anode CA
Yellow LED Seven Segment Display
0.52" Dual Digit 2 Common Cathode CC
Green 5x8 LED Matrix Display
Dot Diameter 3mm 1.48" 1.50" Common Cathode
Yellow Green LED 7 Segment
0.45 inch 3 Digit Three Display Common Cathode CC
Green 7 Segment LED Display
0.8 inch 0.8 Dual Digit 2 7-seg CC CA
Orange 5x7 Display Dot Matrix
3mm Diameter 1.54" 1.25" 1.1" CA LED CC
Yellow LED Seven Segment Display
0.52" Three Digit 3 Common Cathode CC
Some bad manufacturers are driven by inferior rectifier circuits, which will cause the actual energy consumption of LED bulbs to be far higher than that of energy-saving lamps or even close to the level of incandescent lamps. The market has found some brands of 3W energy-saving lamps, the use of 220V power supply input current up to 90mA (19.8W).
3311AB 7-segment
3311AB LED
3311BB Display
3311BB
COB and IMD technology have their own advantages. Although COB has a high packaging cost, it reduces the weight of traditional solidification process and can be developed in the direction of thin and light. However, entering the COB business requires a company to repurchase equipment and production lines, which requires a firm to have a strong financial position. IMD technology can use SMD equipment, production lines and personnel experience.
CL5022AH LED
CL5022AH 0.50 inch
CL5022BH 7-Segment
CL5022BH Display
The non-isolated input design in LED drive circuits, while cost-effective and structurally simple, introduces significant safety and efficiency challenges that must be addressed to ensure reliable performance. Unlike isolated flyback circuits, which use transformers and optocouplers to provide safe, stable DC output with ripple feedback, non-isolated designs lack galvanic isolation, increasing the risk of electrical shock or system failure, especially in high-voltage applications like 220V LED bulbs. This safety concern, coupled with their inability to achieve precise constant current control, often leads to inconsistent brightness and accelerated LED degradation, undermining the energy-saving potential of LEDs.
Blue
12011AB LED
12011AB 1.20 inch
12011BB 7-segment
12011BB Display