Before color matching for full-color LED
5261BS displays, in order to achieve the best brightness and the lowest cost, tricolor luminescence intensity should be selected as far as possible to be approximately 3:6:1 ratio of LED
5261BS components composed of pixels. White balance requires three primary colors at the same gray value synthesis is still pure white.
5261BS LED primary color refers to the basic color that can be synthesized into various colors. The primary colors in the color light are red, green and blue. If there is a deviation in the primary color, the area of synthesizable color will be reduced, and the triangle in the spectral table will be reduced. From a visual perspective,
5261BS color will not only have a deviation, but also reduce the richness.
http://www.xlitx.com/datasheet/5261BS.pdf
This is the English name for LED Strip. Flex LED Strip. This is the English name for the flexible LED light strip. Flex LED Strip is the flexible LED Strip that we call in China. The LED Light Bar. This is the English word for LED strip. LED light strip is usually divided into two kinds: flexible LED light strip and LED hard light strip, but generally also contains the old LED light strip connected with the circuit board with wire, such as flat three 4.3W/ m, flat four 6.48W/ m, flat five 8.64W/ m light strip, etc.
8016AH LED
8016AH 7-Segment
8016BH Display
8016BH 0.80 inch
Although heat pipe heat dissipation is accepted by the industry, the use of more widely but the effect is still more far-fetched, often can not achieve the best temperature LED work; In addition, there is another kind of heat sink heat dissipation, through the heat sink and LED heat source junction contact to take away excess heat through the heat sink, but often because of the size of the equipment caused by the radiator surface area is limited, the effect is not satisfactory. LED heat dissipation mode can quickly take away heat through the efficient heat dissipation capacity of forced convection heat transfer, reduce the temperature of LED chip, and reduce the volume and weight of radiator at the same time, better meet the requirements of LED lighting design miniaturization, which is called active heat dissipation.
3911AH LED
3911AH 0.39 inch
3911BH 7-Segment
3911BH Display
Generally, in the range of 0.071-0.11m, when the fin height reaches this height, the chip temperature tends to be flat, and in the range of 0.05-0.07m, when the fin height is in this range, the chip temperature fluctuation is relatively large. Therefore, the height range of the fins should be controlled to obtain higher chip heat dissipation performance. In addition, in terms of fin length, it is most suitable in the range of 0.03-0.12m, which is also the first choice for the current high-power LED fin length.
LED
CL8021AH 7-Segment
CL8021AH 0.80-inch
CL8021BH Display
CL8021BH
