It should have its own characteristics of high partial voltage and low power consumption. Otherwise, the higher efficiency LED will greatly reduce the overall system efficiency due to too much power consumption of the driving circuit. As far as possible, resistance or series voltage regulator circuit is not used as the current limiting main circuit of LED driver.
Orange Seven Segment LED Display
3.0inch 3.0" Single Digit Common Anode CA
5x7 White Dot Matrix Display
LED 1.9mm Diameter 0.7 inch Anode Cathode
Blue 7 Segment Display LED
7-Segment 0.3" 2-Digit 0.30" Dual Common Anode CA
Yellow 5x7 LED Display Dot
Matrix 10mm Diameter 4.2 inch CA CC
Orange Seven Segment LED Display
1inch 1.0" Single Digit 1 Common Anode CA
Blue 7 Segment Display LED
7-Segment 0.36" 4-Digit Four Common Anode CA
Blue 7 Segment Display LED
7-Segment 0.52" 1-Digit Single Common Anode CA
Blue 5x7 Dot Matrix Display
LED 10mm Diameter 4.2 inch Common Anode
Blue 8x8 Dot Matrix Display
LED 4.8mm Diameter 1.9 inch Common Anode
Yellow LED Seven Segment Display
0.33" Four Digit 4 Common Cathode CC
The blue LED substrate is mounted in a bowl-shaped reflecting cavity and covered with a thin layer of resin mixed with YAG, approximately 200-500nm. Part of the blue light emitted by the LED substrate is absorbed by the phosphor, and the other part of the blue light is mixed with the yellow light emitted by the phosphor to obtain white light. For InGaN/YAG white LEDs, by changing the chemical composition of the YAG phosphor and adjusting the thickness of the phosphor layer, the color temperature of 3500-10000K can be obtained.
3201AB LED
3201AB 7-Segment
3201BB Display
3201BB 0.30 inch
LED (or single lamp) is generally composed of a single LED wafer, reflective bowl, metal anode, metal cathode, outsourcing with light transmission, concentrating ability of epoxy resin shell. One or more (different color) single lights can be used to form a basic pixel. Due to high brightness, it is often used for outdoor LED display. LED lattice module. The matrix is composed of a number of LED wafers and is enclosed in a plastic shell with epoxy resin. Suitable for row scanning drive, easy to form high density LED display, mostly used for indoor LED display.
3491AB LED
3491AB 0.39 inch
3491BB 7-Segment
3491BB Display
From the current technology point of view, each LED sensor has certain limitations, whether it is a radar scheme or a camera scheme, there are shortcomings, therefore, multi-sensor fusion is a current development trend: the advantages and disadvantages of the fusion of the two, foggy days, rainy days can also play a role, but involving two sets of systems, the means of implementation are more complex. Intelligent sensing refers to the self-developed low-latency, high-reliability automotive S0C (ARM+GPU) intelligent processing system.
Red
3521AGG LED
3521AGG 5-digit
3521BGG Segment
3521BGG 
