LED
5261AS display a variety of classification, generally classified according to the following several ways, according to the using environment is divided into indoor, outdoor and half outdoor, indoor screen area generally never to 1 square meters to more than a dozen square meters, indoor
5261AS LED display used in indoor environment, this kind of display screen brightness moderate, large Angle, mixed color closer, light weight, high density, suitable for a closer look. Outdoor
5261AS screen area generally from a few square meters to dozens or even hundreds of square meters, point density is sparse (mostly for 2500-10000 points per square meter), luminance in 5500-8500cd/ square meters (different orientation,
5261AS brightness requirements are different), can be used in direct sunlight, viewing distance in dozens of meters away, the screen body has a good ability to prevent wind and rain and lightning.
http://www.xlitx.com/datasheet/5261AS.pdf
The flexible LED lamp strip adopts FPC as the assembly circuit board, and is assembled with SMD LED, so that the thickness of the product is only 0.1cm thick and does not occupy space. Common specifications are 30cm long 18 LED, 24 LED and 50cm long 15 LED, 24 LED, 30 LED, etc. There are 60cm, 80cm and so on, different users have different specifications. And can be cut at will, can also be arbitrarily extended and the light is not affected.
8011AS LED
8011AS 7-Segment
8011BS Display
8011BS 0.80 inch
And the common active cooling on the market is cooling compressor type, such as our family common refrigerator air conditioning equipment are cold source active cooling device, industrial active cooling device is cabinet air conditioning, the micro chip cooling compressor, etc., can say with active cooling is the future direction of the high power LED heat dissipation. Due to the limitation of volume, large size radiator is usually not used in LED equipment, so the micro compressor cooling system is a good choice for the high-power LED industry.
3191AH LED
3191AH 0.39 inch
3191BH 7-Segment
3191BH Display
On the other hand, the notch and the through hole are the connected channel of the light source area of the LED lamp, and the LED substrate is the highest temperature in the entire lamp, which shows that the heat transmission channel of the LED lamp is from the chip, to the notch, through the hole and then to the substrate, and for other excess heat, mainly through the heat sink channel to delete, so that, According to the specific situation of the high-power LED light, by transforming the internal structure and module of the LED light, find and measure the optimal plan to achieve the heat distribution data statistics.
LED
CL8022AS 7-Segment
CL8022AS 0.80-inch
CL8022BS Display
CL8022BS
