LED lighting market development space is broad. LED lighting applications have developed from outdoor landscape lighting leds in the past to indoor lighting applications. According to the analysis, the development of LED indoor lighting in the next five years will have an exponential growth trend.
3261AH LED
3261AH CC
3261AH Display
3261BH 7-seg
3261BH CA
3261BH LED
The back of each LED light strip is pasted with self-adhesive 3M double-sided tape. During installation, you can directly tear off the stickers on the surface of the 3M double-sided tape, and then fix the light strip in the place where you need to install, and smooth it with your hands.
CL8011AB LED
CL8011AB 7-Segment
CL8011BB Display
CL8011BB 0.80 inch
Due to the differences in chip size, each LED display technology application field is also different. In general, smaller pixel spacing means closer viewing. Traditional LED display is dominated by lighting and display backlight module; Traditional small-pitch leds are usually used in large-size display scenes that require average picture quality. Mini LED can be used as a backlight for large-size display screens, smart phones, car panels and e-sports notebooks, and can also be RGB three-color LED chips to achieve self-lighting display.
3911AW LED
3911AW 0.39 inch
3911BW 7-Segment
3911BW Display
Back edge tangential control LED dimming, The principle of the back tangential LED dimmer is that it is switched on immediately after the half wave of the AC voltage starts, and is turned off immediately when the half wave voltage reaches the set switching Angle, and the LED dimming purpose is achieved by adjusting the switching Angle. Compared with the front tangential phase LED dimmer, the back tangential LED dimmer has no minimum maintenance current requirements, and solves the problem of grid interference and noise, so the theoretical matching is better, but the internal circuit structure is more complex, and the control cost is relatively high.
LED
8041AS 7-Segment
8041AS 0.80-inch
8041BS Display
8041BS
