LED MB chip, definition: MB chip: Metal Bonding; the chip belongs to the patented products of UEC. Features: the material with high heat dissipation coefficient --Si as substrate, easy to heat dissipation.
Thermal Conductivity
GaAs: 46 W/m - K
GaP: 77 W/m - K
Si: 125 ~ 150 W/ m-k
Cupper: 300 ~ 400 W/m - k
SiC: 490 W/m – K
CL3621AH Red
CL3621AH LED
CL3621AH 0.36
CL3621BH 2-digit
CL3621BH LED
CL3621BH Display
Power connection method, the general voltage of LED lamp strip is DC 12V, so it is necessary to use a switching power supply for power supply, the size of the power supply is determined according to the power of LED lamp strip and the connection length.
8011AGG LED
8011AGG 7-Segment
8011BGG Display
8011BGG 0.80 inch
The continuous decrease in cost and price has successfully opened up the vast space of indoor display, but there are still physical technical limitations of small pitch LED, so smaller pitch Mini/MicroLED began to appear in the public eye.
Traditional LED direct-down backlight: it is the mainstream backlight scheme of liquid crystal display at present, which has low cost and can realize dynamic partitioning. Traditional LED side entry backlight: thin type can be realized without dynamic partition.
3291AS LED
3291AS 0.39 inch
3291BS 7-Segment
3291BS Display
It is worth noting that it is best to distinguish that 1-10V does not have the function of a switch, and the lamp cannot be adjusted to the lowest closing effect, while 0-10V has the function of a switch. In simple terms, many lights in a room, each light is equipped with a 0/1-10V control line, and connected to the controller. When the controller is adjusted, the voltage on the control line changes and the lights are turned on or off, the disadvantage of 0/1-10V LED dimming is that the multiple sets of lamps corresponding to a controller can only change at the same time.
LED
8402AS 7-Segment
8402AS 0.80-inch
8402BS Display
8402BS
