Industrial indication display screen is rising quietly, for PLC\DCS and other distributed control system, supporting auxiliary display screen, such as display speed, flow, temperature, pressure and so on.
4301AW LED ultra-high brightness, red A1GaAsLED compared with gaasp-gap LED, with higher luminous efficiency, transparent lining low (TS)A1GaAs LED(640nm) lumen efficiency has been close to 10lm/w, 10 times larger than the red gaasp-gap
4301AW LED. Ultra-bright InGaAlP leds
4301AW provide the same colors as the GaAsP GaP leds: greenish-yellow (560nm), pale greenish-yellow (570nm), yellow (585nm), pale yellow (590nm), orange (605nm), pale red (625nm) and dark red (640nm). Transparent substrate A1GaInP LED
4301AW luminescence efficiency compared with other LED structures and incandescent light sources.
http://www.xlitx.com/datasheet/4301AW.pdf
Because the power of each lamp bead is 0.05W, the power of 72 bead lamp belt is, 72*0.05=3.6W. Each meter has a "scissors" mark, can only be cut in the mark, cut wrong or cut off will lead to a meter not bright! Some will be due to mark off some, it is best to look carefully before cutting the mark position, according to the middle of the place without connection can be cut off.
8011AG LED
8011AG 7-Segment
8011BG Display
8011BG 0.80 inch
The LED unit can be less than 50 microns, only 1% of the ordinary LED. And, like OLED, each pixel can be individually addressed and driven to emit light. Its advantages are that it inherits the characteristics of high efficiency, high brightness, high reliability and fast reaction time of inorganic LED, and has the characteristics of self-lighting without backlight, small size, thin and light, but also can easily realize the effect of energy saving. Mini LED refers to the LED chip with the size of 100μm,
3191AB LED
3191AB 0.39 inch
3191BB 7-Segment
3191BB Display
Through the simulation test to find the best solution, in the test process to keep the temperature constant, simulate the optimal results of the LED lights in the best state, so as to adjust the performance, through the adjustment of materials and structure to achieve the optimization of performance. At present, high-power LED lights will carry out temperature tests in the design to test the specific performance of LED lights, of course, the results of the test will have a certain deviation, but the overall data distribution law is not very different, if the data distribution law is relatively large, you need to reflect on whether there are other problems in the simulation, such as the temperature is not constant, voltage line instability.
LED
8201AW 7-Segment
8201AW 0.80-inch
8201BW Display
8201BW
